All About Flex: Embracing the Mess


Reading time ( words)

Marketing in the world of printed circuits is an important discipline, but I have learned it is better to be prepared with a nimble reaction than to expect the marketing department to consistently be successful in predicting the future. The path to the goal is often achieved much more quickly by making an early decision followed by a course correction rather than waiting for all the information. Several related factoids characterize the markets for flexible circuits and flexible heaters:

  1. We live in a world of “time based competition.” Being faster to market can be more profitable than being better.
  2. Customers’ needs many times don’t fit within the supplier’s existing/proven/Six-Sigma capabilities.
  3. Technology and markets move quickly, rewarding suppliers that respond rapidly.
  4. Customers give suppliers money to figure things out.

The myriad of electronic applications drive flexible circuit product configurations and constructions spanning broad engineering imaginations. Circuits that require controlled impedance push trace widths down, and copper thicknesses increasingly thinner, with .0007” copper a common specification. These applications also tend to drive film substrates thicker to increase separation distance between signals and ground planes. Circuitry intended to carry heavy current pushes copper the opposite direction, sometimes involving metal thicknesses in excess of .010”. These circuits tend to stretch the definition of the word flexible.

Product configuration selections can also involve adding copper layers to make multilayer structures, plating multiple surface treatments for solder pads vs. switch contact regions, attaching selective stiffeners for mechanical and component support, and orientation of copper grain to properly orient circuit traces in applications requiring dynamic flexing. Requirements for optimizing component attachment create an additional complexity dimension as nesting circuits for material usage competes with assembly panelization requirements. These seemingly endless permutations of “want to have” vs. “need to have” requirements can drive mushrooming product features, untested manufacturing processes, and unique routing sequences. It can tax the creativity of the best product and applications engineers. What a mess!

But it is a wonderful mess. Complexity makes sourcing parts overseas, across multiple time zones and language barriers, a very risky proposition. The world of flexible circuit manufacturing involves custom engineered parts with unique performance requirements. Every application is different. The kiss of death on most any part number is when someone states the circuit is a “no brainer.” When I hear this, it is generally time to get material ready for a restart. In an attempt to deal with the mess, the manufacturer is tempted to “standardize” their offering, often defined by comfortable or existing manufacturing capabilities. Isn’t the solution to stop building the oddball parts? Or define a niche product offering so resources can be focused? Maybe, but the business world is littered with companies that have disappeared because they were too restrictive in their willingness to change. Attempting to put in systems or procedures to deal with the complexity is noble, and existing procedures always deserve challenge, but new rules and procedures should be considered as part of a continuous improvement project rather than an end state. Change takes us out of our comfort zone, it is difficult…and often it is absolutely necessary.

Share




Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

08/18/2023 | Andy Shaughnessy, I-Connect007
This week, we have an article about flex-hybrid electronics, which the military and aerospace folks are following closely. We have an article about the digital twin and what it is—and what it’s not. We have 10 outside-the-box ideas for closing the deal—be sure to forward this to your sales team. John Perry brings us an interview with a father/son team of IPC volunteers. (Would you want your children to work in this industry?) Finally, John Watson discusses AI, simulation and SPICE, and what they have to offer for PCB designers.

EIPC Summer Conference 2023: Day 2 Review

06/29/2023 | Pete Starkey, I-Connect007
We had an early start to the second day of the EIPC Summer Conference on Friday, June 16 in Munich. Delegates had returned home safely from the downtown conference dinner and most had successfully avoided late-night networking in the hotel bar. Bright-eyed and attentive, they eagerly awaited the opening session, while casting admiring glances at Alun Morgan who had finally received his baggage and was now splendidly attired in a smart suit, collar and tie.

EIPC Summer Conference 2023: The Keynote Session

06/26/2023 | Pete Starkey, I-Connect007
My trips to Munich usually involve my reporting at productronica, which takes place in November, where I’m most often enveloped in the gloom and drizzle of late fall. For EIPC’s recent Summer Conference, it was nice to be in Munich for blue skies, warm sunshine, and longer, brighter evenings. I thoroughly enjoyed being in the Schwabing area, north of the city.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.