HDI Technology - Flex Circuits


Reading time ( words)

High density interconnect (HDI) is the process of leveraging manufacturing capabilities and materials to create very small interconnect solutions. Small interconnects are required for some of the new applications and dense components on the market. It is the next generation of etched circuitry.

Benefits of HDI

  • Higher density and smaller size
    • Use of advanced component packaging
    • More design options and flexibility
    • Improved electrical performance and signal integrity
    • Improved thermal performance and reliability

HDI Applications

Wearable technology is one of the new applications we are seeing where dense packaging is required. Imagine wearing a sensor device that can monitor all of your vitals and connect to the internet via Bluetooth so your doctor can monitor you remotely. The solution has to be bendable, stretchable, and dense. We will talk more about this in upcoming columns, but this is the type of application that drives density.

Equipment

Gone are the days of plants with rooms full of noisy drilling equipment. HDI requires smaller holes and blind and buried vias that are best done with laser technology. Lasers provide a faster, more cost effective solution over drilling (after you get over the sticker shock cost of the equipment).

Materials

Very thin copper materials are essential to creating high density solutions. Nine-micron copper is what is used in many cases to create HDI solutions. Thinner materials are on the horizon. New higher speed materials—coverlays and adhesives—are being qualified on a daily basis to meet the challenges of higher speeds and impedance requirements.

HDI Lines, Spaces and Hole Sizes

Smaller lines and spaces are required for HDI. Today, 50-micron (2-mil) lines and spaces in production and 37.5 microns (1.75 mils) line and spaces are being provided in prototypes. The laser drill enables smaller hole diameter (50-micron hole diameters) and enables blind and buried vias for even denser packaging.

Resources

HDI requirements and equipment push flex vendors to invest in better educated human resources. The complexity of the circuits and the software for the equipment to make the circuits is driving circuit vendors towards a better educated work force.

HDI Assembly

Many industry flex circuit gurus discuss HDI with regard to the density of the package—the circuit itself. However, in addition to the package, an HDI flex requires HDI assembly—the need to place 1005 components and 12-mil pitch BGAs.

flex_industry.jpg

The flex circuit industry in North America is moving rather quickly. The packaging densities are moving to smaller and the electrical requirements much faster. In order to keep pace with the industry requirements of HDI, North American flex vendors need to invest in equipment, resources and R&D. 

Mike Morando is VP of sales and marketing for PFC Flexible Circuits LTD.

 

 

Share




Suggested Items

The Birth of the Printed Circuit Board

05/23/2023 | Barry Matties and Nolan Johnson, I-Connect007
Every industry has a beginning, and we are lucky to have Rex Rozario here to share the story of how the printed circuit board industry got its start. I-Connect007 chatted with Rex recently about how he became involved with circuit board inventor Dr. Paul Eisler.

NCAB Advocates for Advanced Technologies

05/17/2023 | Andy Shaughnessy, Design007 Magazine
At the SMTA Atlanta Expo and Tech Forum, I spoke with NCAB Group Field Application Engineer Ramon Roche, who gave a presentation at the show titled, “Technical Trends in the Global PCB Industry.” Ramon and I discussed his presentation, the emerging technologies that have NCAB’s focus over the next few years, and why semi-additive processes may be the key to succeeding with ultra HDI technology.

EIPC Review: Ultra-high-density Interconnects, Thin-film Resistor Materials

05/10/2023 | Pete Starkey, I-Connect007
It’s been a little while since I first had the opportunity to review an EIPC Technical Snapshot webinar. This excellent series began in October 2020 when our industry was besieged by the COVID-19 pandemic. It has continued successfully as restrictions have lifted and provides an effective channel for the efficient sharing of relevant knowledge that complements the traditional live conferences. The 20th in the series, in December 2022, focused on environmental issues impacting the electronics industry. In early February, EIPC held its live Winter Conference in Lyon and now, by popular demand, the 21st Technical Snapshot fills a slot before the Summer Conference scheduled for mid-June in Munich.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.