Material Selection for Digital Design


Reading time ( words)

In a previous column, Material Selection for SERDES Design, I pointed out that materials used for the fabrication of the multilayer PCB absorb high frequencies and reduce edge rates and that loss, in the transmission lines, is a major cause of signal integrity issues. But we are not all designing cutting-edge boards, and sometimes we tend to over-specify requirements that can lead to inflated production costs.

In this column, I will look at what types of materials are commonly used for digital design, and how to select an adequate material to minimize costs. Of course, selecting the best possible material will not hurt, but it may blow out the costs.

Olney 1.jpg

Figure 1: Simulated signal propagating through a curved waveguide.

Signals propagate in a vacuum or air at approximately the speed of light. But, as the electromagnetic energy is enveloped in a dielectric material, sandwiched between planes in the PCB medium, it slows down. Figure 1 illustrates a signal propagating through a curved waveguide. This is representative of a typical stripline configuration of a PCB. What needs to be understood is that the signal traces on a PCB simply guide the signal wave, as the electromagnetic energy propagates in the surrounding dielectric material. It is the dielectric material that determines the velocity (v) of propagation of the electromagnetic energy:

 Olney Equation.jpg

Keep in mind that c is the speed of light (in free space) and Er is the dielectric constant of the material (FR-4 is ~4.0). By contrast, the Er of air is 1. Therefore, the velocity of propagation in FR-4 is about half the speed of light or 6 inches per ns. The important concept is that it is the electromagnetic energy that propagates down the transmission line--not electron flow. Electrons flow at about 0.4 inches per second, a snail’s pace by comparison.

Read the full column here.


Editor's Note: This column originally appeared in the August 2014 issue of The PCB Design Magazine.

Share




Suggested Items

Ryan’s Hope: From Cop to CAD

05/16/2023 | Andy Shaughnessy, Design007 Magazine
I recently ran into Ryan Miller of NCAB Group at SMTA Atlanta. Ryan is a field application engineer and a columnist for Design007 Magazine who joined NCAB last year. In this interview, Ryan discusses his path from Air Force Security Forces to design engineer, and he outlines what he plans to accomplish at NCAB.

May 17 Webinar: The Economic Impact of Altium 365

05/16/2023 | Andy Shaughnessy, Design007 Magazine
I recently spoke with Fabian Winkler, product marketing manager for Altium 365. He and guest speaker Casey Sirotnak of Forrester are co-hosting a free webinar on May 17 titled “Unveil the Total Economic Impact of Altium 365.” The webinar will include data from a Forrester case study that examined the economic benefits of using the Altium 365 environment, such as the number of hours saved per designer per year. I asked Fabian to discuss the focus of the webinar, who should attend, and some of the benefits of this environment that allows ECAD and MCAD engineers to collaborate seamlessly.

Electronic System Design Industry Logs $3.9B in Revenue in Q4 2022

05/02/2023 | SEMI
Electronic System Design (ESD) industry revenue increased 11.3% from $3,468.2 million in the fourth quarter of 2021 to $3,858.7 million in the fourth quarter of 2022, the ESD Alliance, a SEMI Technology Community, announced in its latest Electronic Design Market Data (EDMD) report.



Copyright © 2023 I-Connect007 | IPC Publishing Group Inc. All rights reserved.